1 / 2
Spool Arm Gridfinity — zdjęcie 1
1 / 2

Spool Arm Gridfinity

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Repurposed spool arm from Ender 3 V2 Neo, to make it a 1x3 Gridfinity holder.

Ocena
0 / 5
Polubienia
4
Pobrania
16
Wydruki
0
Wyświetlenia
270
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

When I upgraded from the spool holder that came with my Ender to the foldable side mounted one, i was wondering if i could repurpose it as a tool holder. While trying out what tools to fit on it, i saw that it's size was close to a 1x3 Gridfinity bin.

It just had to be made narrower to fit and thicker so the bin could clear the sides.

My print was no top/bottom layers and 10% hex infill, with a 0.6 nozzle, fit was good enough after.

I went for a press-fit, but it didn't hold in place (your luck may vary), so i went with double sided tape.

Tagi