1 / 3
Wall mount adapter for the Bluebrixx Star Trek Enterprise 1701E set — zdjęcie 1
1 / 3

Wall mount adapter for the Bluebrixx Star Trek Enterprise 1701E set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall mount to vertically mount the large brick build Enterprise E by BlueBrixx vertically

Ocena
0 / 5
Polubienia
11
Pobrania
29
Wydruki
0
Wyświetlenia
689
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

A wall mount to vertically mount the large brick build NCC-1701-E Enterprise by BlueBrixx vertically.

The part is split to allow layer orientation in a way, the main forces are not pulling the layers apart, at least for the two parts carrying the sourcer section
Downside: some support is needed.

To connect the wall mount to the model (sourcer section), use two axle and add three technic bushings on each side, to hold the axles and put a round brick from the original stand on each of them. Another 5L axle with one bushing goes into the T connector
 

I added a holder for an optional USB power bank to power the LED lightning I've added to the model.

Tagi