Strong carabiner, self closing - quality remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to be symmetrical, nicer to handle and to remove printing artifacts.
- Ocena
- 4,4 / 5
- Polubienia
- 41
- Pobrania
- 302
- Wydruki
- 6
- Wyświetlenia
- 1258
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the shape of the model this remix is based on, but wanted to improve the very sharp backside. I also wanted to remove the artifacts that made the print visibly “edgy” in some places and led to a lot of ringing. therefore I completely retraced the design and made this.
This model is now symmetrical with chamfers on all sides, but does require a few supports now. The “gate part” is unchanged. (just make sure to lay it flat on the printbed as shown in the attached .3mf, in the original it is angeled very slightly upwards and will screw up your print).
I printed it with 0,6 nozzle and 3-4 perimeters, 20-30 % infill. I am not particularly heavy but I could easily hang on two of these (I used to mostly because I do not have the strenght in one hand to hang on just one of them, that remains to be tested).
Assembly as shown in the original model.