Ender5S1 TPU Wire Stalk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flexible support to prevent binding of the E5S1 Hotend Wiring Harness
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a flexible wire harness support for the Ender5S1 made by Creality.
I was not a fan of the way the wire harness was getting crushed during the homing process, or how it would drag on the build plate for certain prints.
I designed this column to be the correct height for the stock wire harness to mitigate both issues without putting undue added strain on the parts. I have had success with them to date.
I printed these vertically, with supports on the top. Uses 2 x M3 screws and hammer nuts to secure to the frame. I used printed (PLA, not even "+") hammer nuts and have 2000+ hours of printing to date with no issues.