Side-Release Buckle - Pin & Ladder Lock - 24 mm - fully printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,11 € – 0,13 € netto (bez VAT)
Dla pliku: Buckle-full-printable-24mm-Pin-3.2x37mm-A1_0.1mm_PETG_MK3_9m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,12 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 9 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Fully printable Quick Side-Release Buckle, Pin for 24 mm loop straps or adjustable Ladder Lock of a backpack or sea bag.
- Ocena
- 3 / 5
- Polubienia
- 206
- Pobrania
- 437
- Wydruki
- 2
- Wyświetlenia
- 2188
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps.
The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a retaining pin for seabag. That looks robust and it is. However, I thought that it should also work without specially machined parts.
This buckle is now completely printable and the idea of the Pin-Lock type was to make the insertable pin printable as well.
Two Fastening Types
Fully self-printable buckles in two fastening types:
- Pin-Lock type
- Ladder-Lock type (only the male part currently exists)
Common features:
- Produceability: completely and easily printable
- Field Repair:
- Easy to replace in the field
- No special tools required for fastening
- Durability and Strength: very robust and withstands high tensile forces
Pin-Lock Type
The pin-lock type is intended for a loop strap and can be fitted without the loop strap having to be cut and sewed.
Special features:
- Fastening Type: printable Pin-Lock with snap-in nose
- Field Repair:
- No sewing required
- Webbing size:
- width typ/max: 24.0 mm [0.95"]/24.6 mm [0.97"]
- thickness max: 2.8 mm [0.11"]
Ladder-Lock Type
With the standard ladder lock type, the clamping length of the strap is adjustable.
Special features:
- Webbing size:
- width typ/max: 24.0 mm [0.95"]/24.6 mm [0.97"]
- thickness max: 4.3 mm [0.17"]
Print recommendations
General
- Material:
PETG(orASAhowever, I have not tested this myself. So share your makes) - Material drying: dry the filament if the final print is too stringy - like mine was 😉
- Nossle: 0,4 mm
- Infill: 100%
Female-Pin Part
- Layer height: 0.20 mm
- Brim: mouse ears (or normal brim in PrusaSlicer)
- Support: optional, only on printbed (Tree Support)
Male-Ladder-Lock Part
- Layer height: 0.20 mm
- Support: yes, only on printbed (Tree Support)
- Ironing: optional, all top surfaces (for a smooth top surface)
- Note: Ensure strong layer adhesion between the layers and between the extrusion lines.
Male-Pin Part
- Layer height: 0.20 mm
- Support: yes, only on printbed (Tree Support)
- Ironing: optional, all top surfaces (for a smooth top surface)
- Note: Ensure strong layer adhesion between the layers and between the extrusion lines.
Pin part
- Layer height: 0.10 mm
- Support: no
- Printbed: smooth (Preferably not a structured sheet, for a smooth object surface)
Happy 😊 creating usefull stuff 👍
Updates
| 30 Jun 2024 |
|
| 05 Jul 2024 |
|
| 22 Jul 2024 |
|