XXL 256mm Suspended Filament Vortex (Wall Mounted)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XXL 256mm Suspended Filament Vortex (Wall Mounted)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
The Design
Here we here a massive 256mm Vortex made from Suspended filament. This looks great and shows off the capabilities of your Printer.
I made this as the walls of the house were looking quite bare and wanted to put something interesting on them.
Printing
This was set up to be sliced in Bambu Studio or Orca Slicer
Slice with the Arachne wall generator.
Ensure layer thickness is at 0.2mm, Line Width 0.42
Check the preview shows all of the suspended filament correctly
Once printed let the build plate cool.
I have trialed PETG but this did not work.
Print Lines should not fail. If more than 1 fails, please consider recalibrating the printer and drying the filament. Let me know if you do experience any issues and i'll try to help
Do let me know how you get on.