Mevo Start - "Cold Case"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print case for your Mevo Start that comes with a built in cold shoe. Protect your camera from the elements!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 495
- Wydruki
- 0
- Wyświetlenia
- 1922
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I have all of my kids sports games on video from this summer except for the ones in a light rain. So here's a case that will protect your Mevo Start from the rain and gives a handy cold shoe to mount microphones, etc.
Print in PETG for additional heat resistance. 2 M3 nuts and 2 M3x8mm bolts are required for assembly.
Pelican has a case that this combination camera, case, and shotgun mic fits in nicely:
Or, for added nerd cred, print your own case! The SBOX is still my favorite on Printables:
If you end up using the case, let me know your thoughts! The cold shoe on this shotgun mic fits a bit tighter than my other mic setup. Happy to share a few different models if you find it is too tight/loose. Fusion360 source included!