Modular Tacklebox & Leader Tender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular tackle box and leader tender combo. A day on the water fishing is better than a day in the office.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 198
- Wydruki
- 1
- Wyświetlenia
- 1178
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Fishing has always been a part of my life since I was a little kid. I can remember riding my bike to the nearest pong and wetting a line with the hopes of catching something. As I've grown older and had a chance to fish the wild Alaskan salmon, I've had this design in my head. Finally, I've been able to model it and the options are endless for a modular tackle box with pre-built leader storage. I have several other ideas for this design in the future so stay tuned!
Print instructions:
- STL files are already oriented, should be able to just print
- No supports needed
- Layer Height: 0.2mm
- Infill: 20% worked fine; could go thinner or heavier depending on the level of abuse you plan to put it through
- Infill Pattern: Cubic
- Adhesion Type: Skirt
- Prints fine in PLA and PLA Silk so far. Silk seems to be a bit softer
- Recommend the following to start with:
- 1 Storage Cap
- 2 bodies
- 1 Flat Cap
No Commercial use.