Sovol XY belt tensioning system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod is for the Factory gantry
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1662
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
later update: 3 November 2024
The XY Belt Tightening Standard version bottom right.stl was missing a heat set insert for the camera and we have added also a camera holder. You just need to remove the camera from the original holder and swap it. or cut the upper part of the original holder
This mod was created for the people who wants to have a proper tensioning system for the XY but they don't want to print the entire XY gantry.
more about the full gantry you can find here
also you can see how it works in this video
BOM
Heat set inserts
12x M3x5
10x M4x5
4x M5x5
Screws
4x M3x5
4x M3x8
4x M3x12
4x M3x25
4x M4x30
4x M5x18