Parametric Keyhole Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully parametric drawing for a keyhole pin.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully parametric pin designed to mount items with a keyhole. Designed to top mount a power strip next to a 3D printer. Haven't tested for wall hanging, use at your own risk.
Because of the minimal clearance between the top of the base and the bottom of the pin, I didn't design in any chamfer or fillet to self support the pin, so best results achieved by printing with supports “everywhere”.
A few parameters drive the design.
- Base: the side length of the base, always square and always 3mm tall
- Shaft
- Diameter: shaftDia - the diameter of the column between the base and the pin
- Height: shaftHeight - distance between the top of the base and the bottom of the pin
- Pin
- Diameter: pinDia - diameter of the top section
- Height: pinHeight - height of the top section
The pictured print 3mf is included (a 2mm x 2mm shaft, and a 3mm x 3mm pin). I've also included the fusion archive, so do with the model as you want! I'd like to see your remixes, link them to this model.