Wall Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are no modern, clean, nice wall hooks I could find so I designed one. I'm a big fan of Tesa Powerstrips (however…
- Ocena
- 4,714 / 5
- Polubienia
- 122
- Pobrania
- 491
- Wydruki
- 12
- Wyświetlenia
- 3188
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
There are no modern, clean, nice wall hooks I could find so I designed one. I'm a big fan of Tesa Powerstrips (however they are sold outside the EU) so I integrated it. The hook itself is snapped to a base plate which is attached to the wall with a removable double sided pad (Tesa Powerstrips). The one in the cover photo holds the bathrobe since I attached it two years ago so I'd say they are pretty strong.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
10%
Filament:
Fillamentum PLA Extrafill Vertigo Grey
Notes:
There's no need for supports if you print with a smaller layer resolution (like 0.12 in my case). Make sure to print sturdy with some perimeters (I'd suggest 5) so it won't break apart. The infill doesn't really matter as the print is that small, don't waste too much filament on it.
How I Designed This
I used this to experiment with Fusion 360 and got introduced with Components and Joints. That was a fun little project.
Category: Organization