Doppelstabzaun Halter für Stange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It was a great Idea from nobsy1984, but my Double Bar Fence and the stick has other dimension. So I created the Holder
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It was a great Idea from nobsy1984, but my Double Bar Fence and the stick
has other dimension. So I created the Holder new in FreeCAD.
Holder top & bottom for a Tomato-stick (16mm) (Aldi Nord (DE))
Using here a for Archimedes Wind Turbine (Example)
On Picture 1 you see the top side of the stick.
You need additional Material:
6 Screws M4x40 mm cylinder-head
6 Nuts M4
Use stainless steel for using outdoor
Distance between Sticks: 50mm (fence_dist)
Distance Bottom gap: 9.2mmm (fence_gap)
Diameter for Stick: 16mm (Stick_Dia)
Marked green in the Spreadsheet.
The FreeCAD-File has a Spreadsheet, you can change the Dimensions of the drawing.
The red-marked Field are formulas, changed it with caution.
Tip: Open all Parts and control there for Errors
Change only one parameter and look for errors, if no error, change the next one.
For printing you need Part3 three times.
Attention: The 3mf-File are made for Prusa MK4.
I marked as Remix. The Idea has nobsy1984, I made only the new drawings.
Sorry for my bad english and happy printing.
Edit: Corrected a write error.