Tube Ring Lacerta 72 ED Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring to mount two finder-scope shoes on the Lacerta 72 ED Telescope
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 558
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
This is a tube ring that fits the Lacerta 72 ED Telescope and it's purpose is to provide mounting slots for two finder-scope shoes. In the pictures you can see one shoe mounted and the holes for the second one.
I placed strips of velour inside the rings for a better grip.
The rings are different, the bottom ring is slim to fit between the scope and the mounting plate and doesn't have holes in it. The top ring is bigger to allow clearance for the nuts used to fix the finder-scope shoe.
The nuts and screws usually provided with a finder-scope shoe will fit the ring.
Additional parts needed: 2x M4X16mm screws, 2x M4 nut, 4xM4 washers.
I printed this with a 0.4 nozzle at 0.3 layer height to get a fast print as there aren't any delicate details on it to need a better resolution. Additionally i changed the infill to 3D Honeycomb for better strength.