Fishing Float
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple fishing float i designed for someone, it actually printed really well so thought i would upload it.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 189
- Wydruki
- 0
- Wyświetlenia
- 778
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Standard Digital File License
Just a simple fishing float i designed for someone, it actually printed really well so thought i would upload it. I made the bottom flat to make it easier to print and then just trimmed and sanded it round. There is also a dimple at the top so the model will be solid there to make the hole through, i used a small drill bit but I'm sure just heating a needle would work/
Print settings
Key is to print slow around 60-70% and then lower the speed even more at the top to allow it to print cleanly, on the Prusa i slowed it down to 40% at the top. It is a quick print so doesn't add that much time.
Print in Vase mode and enough bottom layers to allow you to round off the bottom, at a .15mm layer height i did 9 bottom layers.
Mine have all been air tight but could be painted to make sure.
Can try playing with the layer height but i found at around 0.15mm to be best.
I printed mine with a .6mm nozzle but I'm sure a .4 would be fine as well.
Post pictures if you catch anything lol.