Bottlecooler for 0.5l Beck's Bottle with (and without) Metallica-Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A totally over-engineered bottle cooler for german 0.5 liter Beck's bottles.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quite simple allthough totally over-egineered bottlecooler for german 0.5 liter Beck's bottles.
The handle is absolutely unecessary but I thought it looks cool and I wanted to practice my design skills. You can also find a model without the handle.
It has a really snug fit but if the bottle gets stuck I added a little slot to bend the cooler slightly open. With the handle it is much easier to bend.
Because not everybody is a Metallica-Fan I added blank ones without the logo.
Printed in PETG, 0.6 Nozzle, 0.36 Layerheight, 5% Infill, 2 outer lines, not supports needed.
I would suggest more outer lines (2+) and less infill (~5%) to save material. Use more Infill if you use PLA for more ruggedness.
It took around 6 hours and 10 minutes to print and about 205g filament on the Creality K1 at 8mm³/s.
Enjoy and feel free to remix and share but no commercial use is allowed.