Foam core (5.5mm) mounting corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are mounting corners that will except a 5.5 mm thick foam core board or a poster board.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created this model so that you could mount a 5.5mm foam core poster to display it on a wall.
You will need to print four of these in vertical orientation to avoid having to use supports.
You will also need some command hook Velcro tabs in order to mount your poster to the wall.
Just slide these poster corners on each corner of the foam core board and there should be enough pressure to keep them in place while you mount it on your wall.
Leave a comment if you would like a version for thinner or thicker board. I am contemplating making a version with an additional groove that could hold a piece of acrylic.