CNC Workholding System (Cam-clamp) (1" Hole Spacing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cam-based workholding/clamping solution for CNC machines based on 1" spacing of 1/4-20 tapped holes
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Here's my workholding solution for my CNC machine, which is based on 1" spacing of 1/4-20 tapped holes in the wasteboard (fairly standard here in America.) The cam mount can be rotated to allow the cam lever to clamp tightly onto most pieces. I use nylon 1/4-20 button-head screws for mounting (to prevent tool breakage.)
This works pretty well! This system is cheap, flexible, quick to make & replace, and clamps+unclamps quickly for production.
You can also use multiple of these clamps for additional stability if you are dealing with larger side-loads. I recommend printing these pieces with some high % of infill and many outer walls.