Hakco mount and depth stop for Maker Mikes's Heat Insert Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hakco 900 soldering iron mount and a depth stop for the press by Maker Mark
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed everything with ABS at 100.3%. The soldering iron part will just screw on to the press exactly like the original. Print with the large end on the bed.
The depth stop is very handy. With thin parts the inserts tend to just push through. If you are doing multiple parts, it makes the process go pretty quickly.
There are two files for the depth stop, “depthStop” and “Knob”. You may have to modify them to accommodate the M5 hex head screw and its nut. My hardware came from Aliexpress, so dimensions are what they are. The head and the nut must be a press fit. I've uploaded both .stl and .step (.stp) formats.
Parts list for the depth stop:
- M5x30 hex head screw
- M5 nut
- M5 washer