Dual Upright Nintendo Switch Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This oddly specific Nintendo Switch holder holds one regular Switch and one Switch Lite
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
This oddly specific model holds vertically the exact same number of Nintendo Switches that had previously lived flat on the side table in our family's living room. Partly, this project was just an excuse for me to use my new 3d printer. Originally, I wanted it to work as a dock like the Switch Dock, but it turned out to be far too involved of a project given the other things I'm trying to accomplish and my level of passion for this particular part! :)
If you wanted to change it to hold more or fewer Switches, or Switches of different sizes, you could go to the Onshape document, change the assembly to hold more switches of the configurations you desire, and then edit the part or create a new part in context. The document also contains a part that I called the interface – the parts that touch the Switch – which could be used as the basis for other designs.
Printed in PLA at 0.2mm line height, structural, 10% infill, supports auto (it puts supports in all the hexagons).
Some things to watch out for:
- The model moves the cord holders slightly lower in the z direction, because the cord was colliding with the Switch Lite's joystick.
- For very thick cords, you might want to add another 0.5mm to the cord holder's overall standoff.