Glue Gun Stand - Bostik 206
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Re-designed this excellent glue gun stand for the Bostik 206, with a beefier design.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Re-designed this excellent model to fit the Bostik 206 glue gun which has a much different shape. Supporting the back end of the tool also helps prevent it from dropping out of the stand and causing spills or melting things. The best part of these glue gun stands is that they stabilize the gun enough that the cord doesn't drag it around anymore!
Due to the higher temps of this glue gun (which melted PLA and came close for PETG), I printed this in “Canadian-Made PC+ White”, 0.4mm nozzle, 0.2mm layer height (Structural profile), on my MK4 with satin sheet and in an enclosure. I reduced the flow to 90% during the print as there was a bit of build-up on the first layer.