Sci-fi mini spaceship toy No.5 easy print - no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini toy sci-fi spaceship. ● Easy to print parts - no supports required● Easy to assemble - requires one #4x3/8" pan…
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 130
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mini toy sci-fi spaceship.
- Easy to print parts - no supports required
- Designed with colour breaks. Print parts in different colours on single colour printers for a more interesting look.
- Easy to assemble - requires one #4x3/8" pan head screw (or a 4G x 9mm sheet metal screw) to secure the windscreen
- A Phillips head #1 screwdriver is also needed. Very helpful (though not always necessary) is a hobby knife, a selection of small files, and/or some sandpaper.
The part orientation as per upload is correct. Interconnecting part fit may be tight, depending on the plastics used, or the printer/slicer settings. Carefully warming female parts (hot water works well) can help with assembly, as can some careful sanding or filing, or even reducing/enlarging the part size slightly during slicing/printing.
Slide the windscreen in from the side and secure with the #4x3/8" screw (or a 4G x 9mm sheet metal screw) from the rear. Insert the engine into the tail prior to inserting the tail into the hull.
Happy swooshing!