Magnetic bed alignement corners for Anycybic i3 mega S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic bed alignement corners for Anycybic i3 mega S
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 3
- Wyświetlenia
- 332
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in heat resistant filament. I used ASA. Place them under the bed, between the bed and your springs or rubber pads.
- ASA
- 4 walls
- 100 per cent infill
Print one for each corner at the back of the heatbed. Mirror the model for the second one.
UPDATE :
After having been using my trusty corners since a while now, I feel that it is useful to add this :
Mine did warp eventually, after intense ASA printing cycles, but that was to be expected. Metal washer inserted between the bed spring and the bed itself can help with this.
Also, I installed a Bltouch on my machine some time after making the corners, and the Bltouch clashed with the corners, because they were slightly too tall. So I printed them again but shorter, simply changing the Z dimension in slicer.
Other than that, they have been helping me align my magnetic bed, like the trusty little helpers that I expect them to be.