32700 LiFePo4 Battery Box 151x65x94 mm 12V for UPS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
32700 LiFePo4 Battery Box 151x65x94 mm 12V for UPS
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 214
- Wydruki
- 2
- Wyświetlenia
- 1656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This battery box was designed to replace the sealed lead acid battery in my APC UPS. The runtime is multiplied with this battery. If it is possible, you need to set the float charging voltage of the UPS to maximum 13,6V to not stress the LiFePo4 cells.
Tested with old APC Back-UPS CS500 (BK500EI) and APC Smart-UPS 750VA (SUA750I). Can be good for other models too.
With this battery pack in the Back-UPS CS500, the idle power consumption dropped to 3W from 7-8W.
Recommended print settings:
- material: PETG (PLA is not good for this)
- nozzle: 0.4mm
- layer height: 0.2mm or variable
- permiters: 5
- infill: 100%
- supports: no
- brim: maybe
You need 4pcs (4S1P - about 80Wh) or 8pcs (4S2P about 160Wh) 3,2V 32700 LiFePo4 batteries with nickel sheets (for simple wire soldering), copper wires (2.5-4 mm2), LiFePo4 4S 40A BMS, 2pcs 6.3mm male connector. You can solder a wires direclry, but I have used WAGOs for the wire connection.
10pcs Speaker Terminal 6.3 Screw Hole 5MM Thickness 0.8MM Connector Plug Spring
10pcs Speaker Terminal 6.3 Screw Hole 4MM Thickness 0.8MM Connector Plug Spring
You need M3 countersunk screws to assemble:
- bottom: 12pcs M3x16mm countersunk screws
- top: 6pcs M3x16mm countersunk screws
- top2: 6pcs M3x35mm countersunk screws
Sealed version:
- 1pcs bottom
- 1pcs middle_solid
- 1pcs top
- 1pcs top2
Open, cooled version (recommended):
- 1pcs bottom
- 12pcs middle_standoff
- 1pcs top
- 1pcs top2_cooled
You need to print the soldering helper to make the soldering easy.