Garden sign + 20 vegetable plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was asked to create and print some garden signs.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I haven't printed any of the plates with English names, but there should be no problems.
Enable normal auto supports for the sign. After printing they were fairly easy to remove. No supports for the plates. I printed out of PLA.
2 walls.
0.3mm layers for the sign / 0.2mm for the plates.
15% infill.
Plate slides in quite tightly at first so be sure to remove supports from the sign properly.
Sign is around 19cm tall. Stem alone is around 14cm tall. Slim design, don't use to much plastic compared to what size they are.
Don't forget to check at what layer you need to pause the print to change filament.