1 / 2
Horde Mug, Alliance Mug, Horde/Alliance Mug Can Holder 16oz — zdjęcie 1
1 / 2

Horde Mug, Alliance Mug, Horde/Alliance Mug Can Holder 16oz

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavily inspired by Respectmfs @Respectmfs_2094398 work on his remix of the ArsMoriendi3D 500 ml Mug Can Holder

Ocena
5 / 5
Polubienia
88
Pobrania
403
Wydruki
5
Wyświetlenia
1628
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Following Respectmfs@Respectmfs_2094398 lead & concept. I remixed the Horde Emblem onto the ArsMoriendi3D Mug Can Holder 16oz version with Fusion 360 and cleaned up the mesh a bit with Prusa Slicer using the windows repair algorithm. The 500 ml version feels better with a 16oz can though cause your mouth doesn't hit the top of the Mug Holder as much. I will be remixing and alliance version and a Horde/Alliance one soon.

Here's the link to Respectmfs@Respectmfs_2094398

https://www.printables.com/model/886132-horde-mug-can-holder-500ml

Update July, 5th 2024 Added Horde and/or Alliance Squished versions of the 16oz Mugs because they look a little more stout but I squished them to 500ml height for better drinking comfort.

Update July 6th, 2024 I test printed the Alliance Mug at .3mm layer height and the Emblem should probably be printed with support but comes out mostly ok without. I'm considering redoing it with and angle on the extrusion. Cura might fix the issue with the feature that alters the model to suit printing, not sure if Prusa Slicer has a similar feature.

Tagi