1 / 3
U-Channels - 119mm & 174mm x 7.6mm x 10mm (Edges) — zdjęcie 1
1 / 3

U-Channels - 119mm & 174mm x 7.6mm x 10mm (Edges)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Set of U-Channel edges and rounded corners to allow the creation of frames, edge guards, and other items.

Ocena
0 / 5
Polubienia
5
Pobrania
100
Wydruki
0
Wyświetlenia
426
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

Plastic u-channel edge protectors that allow cardboard, glass, art and other things to have protected edges. Rounded corners cover the u-channels for a finished look. These were developed to fix a childs miniature whiteboard, but have found many uses for them. I used glue to hold them together, but the edges of the corner pieces help hold the side pieces together.

I have printed in PLA and PETG on a Bambu Labs X-1C and a Prusa XL printer. Brims should be used to help stabilize the parts if your printer is prone to having parts come off the plate when printing.

These are an original design and are not a remix of any prior design. Parts developed in TinkerCad.

 

Apologies - original upload did not include corner, but I thought I had. There are two corners. One has a straight edge like the channels. The other has a ridge that should lock over the straight pieces. You may need to adjust it based your print size creep.

These can be printed without supports by flipping onto the edge (straight and corners).