VW T5 MPPT dashboard mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dashboard mount for an MPPT solar charger head unit. Fits into T5 dashboard accessory slots.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My friend wanted to fit his VW T5 Caravelle with a solar panel and put an MPPT charger in the trunk, so I designed this adapter for mounting the head unit to the dashboard. It requires 2 empty accessory slots + a hole / another slot to route the cable. The mount accepts four M4 nuts and bolts.
Printing instructions
The provided prusa slicer project (.3mf) already has all the right settings. Generally, a default preset for a 0.2mm layer height works well. You need to use supports for the large semi-circular overhang and the 4 tiny pins on the dashboard adapters. None of those surfaces are visible after assembly, though.
Print this from a filament that can withstand some heat (definitely not PLA). I printed mine from PETG and it's fine, but consider something like Nylon, especially if you live in a hot climate.
MPPT charger: EPever DuoRacer DR1206N-DDS
Head unit: EPever MT-11