Single 120 Film Canister/Holder - using 35mm film canister lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A film canister for your 120 film using old lids from 35mm film canisters. Made to fit most 35mm canister lid types.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 697
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When transporting 120 film along some 35mm canisters I thought to myself its a same these aren't universal. "I have tons of 35mm canisters sitting around that will never get any use. Why doesn't 120 film fit in these tubes…"
I decided the closest I could get to utilising the 35mm canisters was to use the lids and extend the tube to fit 120 film.
I have designed this canister to fit the 3 different lid types I've found among my pile of old canisters. After some test prints I now believe I have a good fit and release with all 3, so hope this will be something most people can use.
If there are other lid types I have not considered please reach out and I will modify the model to accommodate.
Siege Industries
