1 / 9
Christmas Light - Star - Led Stripes — zdjęcie 1
1 / 9

Christmas Light - Star - Led Stripes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a structure to hold my LED stripes in a Star like pattern!

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

I made a structure to hold my LED stripes in a Star like pattern! I'm still printing the parts, so i'm not sure every thing works out...

cause i can only print 20x20 on my reprap i decided to split it into various parts: The starbase - you only ned it once The Y Parts - you need six The V Parts - you also ned six, but i made one with a hole in it so you can hang it if you want to The small square - you need 12, this is what i use to glue the Y and V parts together The small squares with the stuff on it - you need 6, this is what i use to glue the Y and the star part together. The holes are for the cables.

Every part ran through netfab cloud and had no problems slicing with slic3r.

 

Tagi