bambu p1s p1 carbon reserved hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 3d printable hanger for the door of a bambu printer to reserve the printer 2 sides, a reserve and a high prio side
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
if you are an engeneer, you know the problem of a printer being used when you need it. often you need to be quick, before you know it, the printer is occupied.
to solve this problem, i designed this doorhanger. it will signal the other guys that the printer is reserved and that they must not start a new print.
the hanger has two sides: a simple reserved side, for mid priority print, and a high priority side for a high priority print.
the reserved side is printer in the same layer, the prio side is embosed. you need a multi coller 3d printer or ams to print the hanger at both sides. the high prio side can also be printer with a “mid” print filament change.