Bronica GS-1 Viewfinder Bottom Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom cap for any Zenza Bronica GS-1 viewfinder, including the GS-1 Prism AE Finder, and the GS-1 Rotating Prism AE…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Bottom cap for any Zenza Bronica GS-1 viewfinder, including the GS-1 Prism AE Finder, and the GS-1 Rotating Prism AE Finder. Originally I made this to be printed with TPU, for flexibility, and it certainly works, but it's not very attractive. I found it works equally well with more rigid PLA, and I expect it would work well with even more robust ASA. I printed it with a silk PLA for the purposes of the photos. (Though it certainly adds a bit of 80s pro photo gear look, as some manufacturers were putting gold flair on their gear at that time!) I added the logo/text to help indicate the orientation of the cap (text is the front of the finder).
Print Settings
Printer Brand:
Snapmaker
Printer:
Snapmaker 2 A350
No
Supports:
Yes
.16 layer height
Infill:
15
Notes:
I used support for the little overhangs, but the supports didn't really "hold," but it didn't matter, because each one I printed came out perfect. If you choose to use TPU, be prepared for a lot of cleanup - lots of strings.
Category: Camera