Philco Model 511 Speaker Vintage Radio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own version of the Philco model 511 vintage radio speaker. These were wired to the main radio, and are very hard to…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
My own version of the Philco model 511 vintage radio speaker. These were wired to the main radio, and are very hard to find. I needed one for a show, so I built a wooden version of the main radio (the originals are metal, painted to look like wood) and designed the speaker portion. I needed to break it up into 4 quarters, due to the size of my print bed. Photos show the finished piece (including authentic Philco 511 brass dial plate) - and other photos show the basic assembly. I used a piece of vintage-looking fabric for the speaker. Everything was printed in PLA, glued and painted. The final image is one of the inspirations I found. Feel free to modify!
Print Settings
Printer Brand:
Creality
Printer:
CR-10
No
Supports:
No
0.2
Infill:
15%
Notes:
One could add Bluetooth speaker capability to this with one of the many BT speaker kits available.
Category: Props