Proxxon PD250/e Way Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetically attached way covers for the Proxxon PD250/e mini lathe
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of magnetically attached way covers for both the lathe bed and cross slide.
The bed covers are meant to hold 100mm flat bellows which can be found on ebay for pretty cheap. They consist of one bottom piece that attaches to the bed and one that attaches to the carriage. They attach via 5x3mm cylindrical neodymium magnets that need to be glued into the prints. You'll also need to insert in some M3 heat set inserts to attach the top that clamps the bellows in place.
The cross slide way covers also attach using the same kind of magnet and come in several variations for both the left and right side of the cross slide. The regular ones will work for most cases but there is also a “reversed” version for when you're working with small boring bars close to the center line of the lathe and a “short” version of the left side cover for when you're working very close to the chuck to keep the cover from bumping into the motor housing.