1 / 3
MK3S+ MMU HGX Extruder Gear Kit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some modifications were made to resolve a loading failure when importing filament from MMU.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (22)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (8)Powiązane
To solve the problem of loading failure when pulling filament from MMU, we made the extruder idler closer by about 0.2mm. Through this, you can use MMU and HGX Extruder without any problems.
Only compatible with “BiGear_Extruder_motor-plate V4” = “BiGear_Extruder_idler V4”
have also modified some files to prevent problems when printing without support.
M350 E16- Set microsteppingM92 E1124- Change the E-stepsM500- Save
July 6, 2024
sorry. The BiGear_Extruder_idler I originally posted was wrong.
