1 / 2
LED_remote_holder_8x52mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are remixes of the original LED remote holder by @Ole_194138 Models are made for 8mm x 52mm and 8mm x 56m remotes
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 62
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I find it best to print these standing up, no brim needed.
Printed in PLA @0.30mm