Slim Keychain Case for Adafruit Neo Trinkey
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim keychain case for the Adafruit Neo Trinkey. A piece of thin double sided tape is required to stick the parts…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 574
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A slim keychain case for the Adafruit Neo Trinkey.
A piece of thin double sided tape is required to stick the parts together.
Its kind of flimsy where the end of the end of the PCB meets the keychain hole but it would likely be fine to use as a keychain. This might be improved in a future design.
Print at 0.12mm layer height for best results
f3d and step files are included if you wish to modify it.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
No
0.12mm
Infill:
20%
Filament:
[
](http://www.amazon.com/s?url=search-alias&field-keywords=Inland+PLA+%2B&tag=thingiverse09-20)[ Inland](https://www.amazon.com/Inland-1-75mm-PLA-Printer-Filament/dp/B081S5YNYY?dchild=1&keywords=inland+filament&qid=1618263060&sr=8-3&linkCode=ll1&tag=thingiverse09-20&linkId=b15f7f4b138980e111aa6ba74ac3eeb7&language=en_US&ref_=as_li_ss_tl) PLA + White
Notes:
The flat part should be 3 layers thick
- Carefully remove from print bed
- Apply double sided tape to the back side of the PCB
- Stick them together (see photos for more detail)
- Add to keychain
Category: Electronics