Blobchute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Purge solution remix of Blobifier to suit MercuryOne.1/Trident/Printers with beds that go up/down
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 1140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to work on my MercuryOne.1 with Tradrack MMU. Printed from PETG-CF. I only print PLA on this machine and PLA will not stick to PETG so it's a great none stick solution. My setup has the nozzle about 8mm above the tray and it works very good. Tuning of macros will be required to make it work just right. Attached is my config.
Side note: I have the tolerances tuned for my printer, which is dialed in really good. Also my printer isn't exactly a MercuryOne.1 so things may need to be different. Basically take this as a base to edit to suit your printer rather than a finished product.