BTT PI TFT50 Screen holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for Sovol SV04 to be mounted on the right side of the printer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for Sovol SV04 to be mounted on the right side of the printer. But it should be possible to use on all printers with 40x40 mm frame since it is screwed to the end part of that.
It has place for a small fan so that it can be in the heated chamber and still not get the RaspBerry Pi or similar mounted on the screen overheated. There is place for all USB connectors inside the holder and the cables gets out at the back.
Can be printed with PLA but if it is in the enclosure PETG should be a better choise.
A couple of M4 inserts for the bracket to be attached to the main part is needed.