Ikea lack enclosure bottom corners 60mm elevation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height 60mm (exactly 61mm) for the Ikea Lack case. The cable hole is 10mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Height 60mm (exactly 61mm) for the Ikea Lack case. The cable hole is 10mm. The space for the wall are 3mm. You can use other pieces of plexiglass or hardboard (I'll use the hardboard from my plexiglass package) and paint it.
It's not perfect, maybe I'll fix it someday. maybe not, but it doesn't affect usability :)... The part with the cable hole is cut too deep for the screw and crossed with the cable hole, which creates an additional hole ;]. Which means that the screws screw deeper into the table than in the original design. Still works good.
P.S. On photo walls wait's for paint :)
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V3 SE
No
Supports:
No
20
Category: 3D Printing