Airsoft silencer/suppressor. (work in progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silencer/suppressor. (work in progress) 14ccw
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 202
- Wydruki
- 0
- Wyświetlenia
- 1699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
all kinds of different combos, outer shells, internals, end caps with and without holes for gas/sound to escape
all of them fit together except for the long version, the longer version will still work with the endcaps but also need a longer internal filler
------(not released)------
the suppressor core with all the holes works like a muffler for an exhaust, and can be filled with any kind of fabric, sponge, or foam each kind of material will change the sound, so play around with it if you like :)
Bottom needs to be with 5-6 walls and 25% infill if you use blowback (for strength)
Silencer/suppressor 1. (dots) I recommend 0.4 nozzle, 0.12mm-0.16mm layer height 3 walls 15%infill. (2 walls if 0.6mm nozzle)
The rest looks and works fine at 0.2mm layer height.
If you need a different thread leave a commend or send a message.
This is a work in progress, and i hope for some honest feedback and ideas.