1 / 5
Adapter HT-Rohr DN50 auf R 1¼" - Adapter HT pipe DN50 to R 1¼"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 Perimeter 30% Infill 0,16mm Layer
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Ich benötigte für den direkten Anschluss eines Rückschlagventiles an ein HT Abwasserrohr DN50 einen Adapter, um das kurze Schlauchstück zu vermeiden. Das Gewinde des Rückschlagventils ist R 1¼".
Unbedingt mit ASA drucken; ASA ist für heiße, laugenhaltige Abwässer bestens geeignet.
I needed an adapter to connect a check valve directly to an HT sewage pipe DN50 in order to avoid the short piece of hose. The thread of the check valve is R 1¼".
Be sure to print with ASA; ASA is ideal for hot, alkaline wastewater.