1 / 2
Bottle Holder for RAKO Hydroponics
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a 1 litre bottle to continously fill up the 3d printed RAKO hydroponics system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for a 1 litre bottle to keep the water level of the RAKO hydroponics system at constant height.
For the Pots and Lids check out dbrgn's model: https://www.printables.com/model/922798-rako-hydroponics-pot-lid
The holder requires a 60mm hole, the same size as the pots. It can be screwed in.
There is also an outlet to adjust the height of the water level. Add a small O-ring to the outlet and stick it into the bottle.