JerryRigEverything knife replacement handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for this knife
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
My original clear plastic handle broke, so I designed this to repair it.
One notable difference with the original is that I discarded the clip.
Here I used Honeycomb infill with Neon Green Prurament PETG and a 0.4 nozzle.
Bill of Materials
- x3 M3 heatset inserts
- Mine were small ones, 4mm in height
- x3 M3 - 12 mm Socket Cat bolts
Assembly
The two parts are different, one is meant to receive the heatset inserts and the other side for the bolts.
The side for the inserts is the one where the holes go deeper and are wider, I hope this makes sense.
Refer to JerryRigEverything's video for assembly:
Remixing
The source file is available at OnShape over here: https://cad.onshape.com/documents/c7a08636eb0701545a169dd2/w/315efe893cb1dc8097a58004/e/a9d2e67a19507762fede1338?renderMode=0&rightPanel=variableTablePanel&uiState=668805e53061dc322dcbfbdc .