1 / 5
Garden crop cage net enclosure fittings replacement - OutSunny — zdjęcie 1
1 / 5

Garden crop cage net enclosure fittings replacement - OutSunny

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement fittings for 14-15mm tubes, I replicated in TinkerCad for the OutSunny crop cage.

Ocena
0 / 5
Polubienia
5
Pobrania
28
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Friend bought an OutSunny 10 x 6.5ft Crop Cage, Double Doors Plant Protection Tent Black and the fittings started to break, so I replicated in TinkerCad and printed with PETG 100% infill, no supports, brim only in Straight as it prints vertical.  I have included the base model used to make the others.  These press fit on to the tubes usinmg internal raised ridges and can be tight, suggest puting plumming emery cloth sandpaper on a long cotter pin and use a drill to sand down the inside if you need a more relaxed fit. 

You need 8 Corners, 4 Middle and 14 Straight to replace them all.

But since its an STL don't think you can ungroup to modify.  Trying to generate a STEP file from TinkerCad, but not working so pls find it on TinkerCad as I will make it public - link to my public models:    https://www.tinkercad.com/users/iDBVkDLt4tW-brian-m-prince

 

 

 

Tagi