1 / 2
Potentiometer wrench Roland Groovebox MC307 / Possibly 505 etc (11mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick wrench design to fit the recessed potentiometers in the Roland MC-307. Unfortunately not a perfect fit (I scaled…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Quick wrench design to fit the recessed potentiometers in the Roland MC-307.
Unfortunately not a perfect fit (I scaled the hex bit to 11.2mm, very tight but with a little downward pressure it will latch on to the nut!), it will get you out of a bind if you haven't another tool on hand to do the job.
Printed several copies at a time in PLA myself to allow the layers to cool better, being so small it didn't work so well printing just one.
Category: Electronics
