1 / 1
Upholstery nozzle for Grundig Cyclonic vaccum cleaner — zdjęcie 1

Upholstery nozzle for Grundig Cyclonic vaccum cleaner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nozzle for vacuuming sofas, chairs etc.

Ocena
0 / 5
Polubienia
7
Pobrania
84
Wydruki
0
Wyświetlenia
801
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Share Alike

Our Grundig vaccum didn't have an upholstery nozzle, so I created this quick-and-dirty OpenSCAD mashup of https://www.thingiverse.com/thing:3846270 by innif and https://www.thingiverse.com/thing:1763542 by cyril50. Works nicely to clean dog hair off the couch.

Note: I can only say for sure that this part matches the Grundig Cyclonic 21.6V, model VCH 9832. It's very likely to also match other models, but I recommend to just print the bottom-most bit first and check if it actually fits.

In the default orientation, it can be printed with only supports touching buildplate.

Tagi