Faster printing pizza table box spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pizza table type spacer that prints faster and uses less filament
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 266
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
We need to have small spacers for some cakes we make for friends. Something like the small “pizza tables” that come in pizza boxes. Most of the existing designs out there have the legs already attached in the model. This ends up with the layer lines going through the legs which results in less strength. It also takes longer to print since there are more Z layers.
My design of a pizza table has the legs separate so that they can print flat. Once printed, they just push in. you may need to scale the legs up or down slightly for a snug fit. The default scaling is perfect for a bambulab x1 carbon printing in PLA.
COMPARISON OF QTY 10: | Print time | Material used |
| My table | 1h4m | 28.07g |
| Other designs | 1h48m | 31.45g |