Chair leg floor protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU floor protector for chairs with small legs.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits chair legs with dimension 17mm (0,66'' or 21/32'') at the bottom and 18mm (0,7'' or 23/32'') at 20mm (0,79 or 13/16'') height from the floor. The fit is snugg and discret since it easily blends to the chair design.
As always with TPU it can need some fine tuning depending on the TPU. I did find it made a better print when I printed several models on one plate and not just one. I printed in TPU 95 and it worked out well, a good balance between flexible and strong.
Hope it fits your chair and saves your floor from scratches.
If you print it, please post a make and give a review.