Revised Zorro Radio Switch Key Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A revised power switch 3/32 hex key holder and screwdriver holder for the Radiomaster Zorro.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
After seeing Seth from Team Just Cuz Robotics using his version in his robot combat videos I wanted one. I attempted to print his version with the multiple TPU filaments that I had on hand in the orientation that was shown but was unable to due to the overhang. I was thus forced to make my version of it. I also increased the stability of it by making a larger contact area and making it fit tighter to my specific* Zorro.
You will need to have your supports dialed in since you will need supports for the little "screw ears" at least in the orientation I printed it in, as shown in image #5.
Intended for M2 x 12 screws
*Your Mileage May Vary