Silly Walks Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This another version of the Monty Python's Ministry of Silly Walks wall clock. Based on the stencil by Jan Flaška.
- Ocena
- 5 / 5
- Polubienia
- 112
- Pobrania
- 480
- Wydruki
- 5
- Wyświetlenia
- 3255
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This another version of the Monty Python's Ministry of Silly Walks wall clock.
Based on the stencil prepared by Jan Flaška, modified substantially.
This clock has been designed to fit the TFA 60.3525.01 (radio controlled) and TFA 60.3024.01 (manual) clock movements, but any movement that has 8 mm shaft and can accommodate a 5 mm thick dial will fit.
If you are going to use a different movement, you may have to modify the hole diameters on the legs.
Total dimensions:
Width: 198 mm
Height: 198 mm
Thickness: 46 mm
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.20 mm
Infill:
15% Honeycomb
Filament:
Filament PM PETG White, Black
Notes:
4-5 perimeters work best
Plan for a color/material change at Z=3.2 mm when printing the dial/face.Slow down to 50% when printing the numbers/image.
Align the seams to rear.
Fits the MK3S bed without issues, may not fit the MINI (resize as needed, but adjust the hole diameters).
No glue required, everything should press-fit.
Category: Decor